CODE
CONSUMTION
LED COLOUR
CABLE COLOUR
SEGMENT
Nº LED/SEG.
MEASURE
192644
10,5W
Cool white
Transparent
3
58
3x0,9m
192651
10,5W
Warm white
Transparent
3
58
3x0,9m
ACCESSORIES
192606
Power cable (NOT INCLUDED)
230V dc
IP20
60º
-20º
15sets
1m
0.9m
x3
WARNINGS AND PRECAUTIONS:
• This product is suitable for use at indoors.
• This is a decorative product! It is not a toy, keep out of reach of small
children.
• Do not manipulate the product while it is working.
• Under no circumstance, should you cut, change or reduce it.
• Do not use this product in contact with water directly or with wet hands.
• Make sure that all the connections are well placed and right tight and
sealed.
• Check that all the connections are secured with its corresponding heat
shrink tube
• Protect all the cables against any possible damage.
• The lamps are not exchangable.
• Do not connect this product to another.
• If the product is defective, it must be disposed.
• Throw away properly any defective product.
• Never place or use this product close to heat sources.
• Disconnect the electrical current before installing this product.
•
In case of technical questions, ask always to qualified staff.
WARNINGS - BEFORE PUTTING INTO OPERATION
• Before putting it into operation, make sure that the voltage of the grid is
compatible with that one which is indicated in the power supplier.
• Before putting the product into operation, check out that it is not dama-
ged.
ASSEMBLY INSTRUCTIONS: SAFE INSTALLATION
GENERAL
• Do not use any metal tool or material which lead to a cut in the thread.
Those might damage the product, cause short-circuits or a bad performance
of the product.
• Take into account that the useful life of the product depends considera-
bly on the way it is mounted, dismounted and deposited.
• Treat it always carefully and properly.
ASSEMBLY
• For the assembly ( ex. steel cable), use preferably UV-resistant seals or
original accessories
• Mount always this product the most stable and right possible. Do not let
this product hang freely.
• Make sure that the minimum distance of 1.5 cm between cables and
lamps is not exceeded.
• In operation, lamps and cables must not be touched, crossed or being
rolled or twisted.
ASSEMBLY INSTRUCTIONS: SAFE EXTENSION
• Do not connect between each other more products than those which
are authorised.
• Take into account the fact that the maximum quantity of products
connected which you will find on the upper chart of the package or in our
catalogue.
RECOMMENDATIONS
Reviewing all connections and splices motives and Christmas products is re-
commended before and after their operation in each campaign to prevent
condensation and expansion joints.
We recommend uninstalling the product at the end of each campaign.
174
WARNING
BEFORE STARING THE INSTALLATION OF THIS PRODUCT
, PLEASE READ ATTENTIVELY THE INSTRUCTIONS AND
KEEP THEM IN A SAFE PLACE.
THE INSTALLATION SHOULD BE PERFORMED BY QUALI-
FIED PERSONNEL.
THE IMPROPER HANDLING OF THE COMPONENTS
OR THE PRODUCT COULD DAMMAGE THE CORRECT
FUNCTIONING OF THIS DEVICE THUS CANCELLING THE
WARRANTY OF THE PRODUCER
THE WARRANTY OF THE PRODUCER IS CANCELLED IF
THE INSTALLATION IS NOT PERFORMED FOLLOWING
THE INDICATED IN REBT 2002.
THE APPLICATION ITC BT09-4 OF THE REBT IS MANDA-
TORY (INSTALLATION OF OVERVOLTAGE PROTECTORS
OF IN LINES AND RECEIVERS) FOR INDUSTRY INSTALLA-
TIONS AND PUBLIC LIGHTING. THE WARRANTY DOES
NOT COVER DAMMAGES PRODUCED BY OVERVOLTA-
GE ON RECEIVERS WITHOUT OVERVOLTAGE PROTEC-
TORS.
THE APPLICATION OF ITC BT19 ( INTERIOR OR RECEI-
VING INSTALLATIONS.GENERAL PRESCRIPTIONS) IS
MANDATORY.
THE APPLICATION OF ITC BT34 (INSTALLATIONS FOR
SPECIAL PURPOSES. FAIRS AND STANDS) IS MANDA-
TORY.
MAINTENANCE OF THE PRODUCT
ALL PRILUX CHRISTMAS LIGHTING MOTIF, NEED A
MAINTENANCE BEFORE BEING USED, IT MEANS TO
CHECK ALL THE CONNECTIONS (INCLUDED THE END
CAP) IN ORDER TO BE SURE THAT THE MATERIAL HAS
THE PERFECT TIGHTNESS.
[GRÁFICOS: Unidades en mm/ GRAPHICS: Units in mm/GRAPHIQUES: Unités en mm/GRÁFICOS: Unidades em mm]
