Pride Quantum Rehab edge, Owner'S Manual

Page: 17 / 36

Q6 Edge www.pridemobility.com 17
V . C O M F O R T A D J U S T M E N T S
Seat Angle (Dump) Adjustment
Your seat may be equipped with mechanism that
allows you to adjust the seat angle (dump) from -5° to
+21° in 2,5° increments. See figure 13.
NOTE: The exact tilt angle adjustment range may
vary depending on seating system and seat height.
NOTE: For more information on operating the power
positioning systems, refer to the information supplied
in supplemental manuals or contact your Quantum
Rehab Provider.
Seat Height Adjustment
Your seat may be adjusted to one of three heights.
To adjust the seat height:
1. Remove the occupant from the power chair.
2. Remove the detent pin from the front seat interface.
See figure 7.
3. Pivot the seat rearward and remove the seat from
the power base by removing the hardware that
attaches the rear seat securement brackets to the
interfaces on the bottom of the rear of the seat. See
figure 7.
4. Remove the hardware that attaches the rear seat
securement brackets to the power base.
5. Adjust the seat to the desired height.
6. Reinstall the hardware that attaches the rear seat
securement brackets to the power base.
7. Reinstall the hardware that attaches the rear seat
securement brackets to the interfaces on the bottom
of the rear of the seat.
8. Reinstall the detent pin to the top of the tilt actuator
using the detent pin. See figure 7.
Seat Width Adjustment
You can adjust the seat width from 40,6 to 50,8 cm (16 to
20 in.). See figure 14.
NOTE: Changing the armrest width may increase the
overall width of your power chair.
Figure 14. Seat Width Adjustment
Figure 15. Leg Rest Width Adjustment
Figure 13. Seat Angle (Dump) Adjustment
21°