Pride QUANTUM JAZZY SERIES Owner'S Manual Download Page 29

Quantum Jazzy 1420 Series

www.pridemobility.com

                          29

V I .   B A T T E R I E S   A N D   C H A R G I N G

BATTERIES AND CHARGING

The power chair uses two long-lasting, 12-volt, deep-cycle batteries. These batteries are sealed and maintenance

free. Since they are sealed, there is no need to check the electrolyte (fluid) level. Deep-cycle batteries are designed

to handle a longer and deeper discharge. Though they are similar in appearance to automotive batteries, they are

not interchangeable. Automotive batteries are not designed to handle a long, deep discharge, and also are unsafe

for use in power chairs.

MANDATORY! Battery posts, terminals, and related accessories contain lead and lead

compounds.  Wear goggles and gloves when handling batteries and wash hands after

handling.

WARNING! Contact your authorized Quantum Rehab Provider if you have any

questions regarding the batteries in your power chair.

WARNING! Do not use batteries that exceed the recommended type and amp-hour

capacity. Do not use batteries with different amp-hour capacities. Refer to

specifications table in this manual and in the manual suppled with the battery charger

for recommended type and capacities.

Charging the Batteries

The battery charger is essential in providing long life for your power chair batteries. It is designed to optimize your

power chair’s performance by charging the batteries safely, quickly, and easily. The battery charging system

consists of the battery charger, the charger circuit fuse, and the ammeter (onboard chargers only). The ammeter

indicates the rate of charge necessary to fully recharge the batteries. It is also a good indication of whether or not

the charger is working. The ammeter and the charger are only functional when the charger power cord is plugged

into an electrical outlet. 

PROHIBITED! Removal of grounding prong can create electrical hazard. If necessary,

properly install an approved 3-pronged adapter to an electrical outlet having 2-

pronged plug access.

PROHIBITED! Never use an extension cord to plug in your battery charger. Plug the

charger directly into a properly wired standard electrical outlet.

PROHIBITED! Do not allow unsupervised children to play near the power chair while

the batteries are charging. Pride recommends that you do not charge the batteries

while the power chair is occupied.

MANDATORY! Read the battery charging instructions in this manual and in the manual

supplied with the battery charger before charging the batteries.

WARNING! Explosive gases may be generated while charging the batteries. Keep the

power chair and battery charger away from sources of ignition such as flames or

sparks and provide adequate ventilation when charging the batteries.

WARNING! You must recharge your power chair’s batteries with the supplied off-board

battery charger. Do not use an automotive-type battery charger.

WARNING! Inspect the battery charger, wiring, and connectors for damage before

each use. Contact your authorized Quantum Rehab Provider if damage is found.

WARNING! Do not attempt to open the battery charger case. If the battery charger does

not appear to be working correctly, contact your authorized Quantum Rehab Provider.

WARNING! If the battery charger is equipped with cooling slots, then do not attempt

to insert objects through these slots.

WARNING! If your battery charger has not been tested and approved for outdoor use,

then do not expose it to adverse or extreme weather conditions. If the battery charger

is exposed to adverse or extreme weather conditions, then it must be allowed to

adjust to the difference in environmental conditions before use indoors. Refer to the

manual supplied with the battery charger for more information.

Summary of Contents for QUANTUM JAZZY SERIES













































Reviews: