OPERATING THE POWERASSIST
• Lift-up strap. The PowerAssist comes with a lift-up strap to allow the wheelchair to move when
there is no power. Lift up the PowerAssist with the red strap and hook the second loop around
the push handle. Please note that failure to lift up the PowerAssist when reversing may cause
the pack to flip over.
• Maximum Speed. Always set a maximum speed which you are comfortable walking with.
• Pushing the Wheelchair When Not In Use. We recommend that the powerpack is restrained
with the lift-up strap when not in use.
• Ignition – Dual Wheel Version. The dual wheel version of the PowerAssist has a three position
button to power up the motor. To allow the PowerAssist to move forward press the front of the
button (marked “I”). To allow the PowerAssist to move backwards press the rear of the button
(marked “II”). To switch off the PowerAssist press the button so the switch is in the middle posi-
tion (marked “0”).
• Please note there is a 2-second delay when starting up the PowerAssist before the wheel will
move. Wait 2 seconds before squeezing the trigger.
• Always ensure the PowerAssist is switched off when not in use.
HANDLESET OPERATION
INNER
KNOB
POWER
EYE
IGNITION
OUTER
KNOB
TRIGGER
SPEED
DIAL
