30
www.pridemobility.com
Pride Scooter Series
V I . D I S A S S E M B L Y A N D A S S E M B L Y
DISASSEMBLY
You can disassemble the Travel Scooter into five pieces: the seat, main frame, battery pack, battery compartment
cover and basket.
See figure 16
. No tools are required to disassemble or assemble your Travel Scooter, but keep
in mind that the disassembled sections of the Travel Scooter take up more floor space than the assembled unit.
Always disassemble or assemble your Travel Scooter on a level, dry surface with sufficient room for you to work
and move around your Travel Scooter—about 1.5 metres (5 ft.) in all directions. Remember that some Travel
Scooter components are heavy, and you may need assistance when lifting them.
WARNING! Do not lift beyond your physical capability. Ask for assistance when necessary
while disassembling or assembling your Travel Scooter.
To disassemble the Travel Scooter
:
1. Turn the tiller lock knob to its locked position. See III. “Your Travel Scooter.”
2. Remove the seat by lifting it straight up and off of the Travel Scooter.
3. Remove the basket by lifting it straight up and off the securement bracket.
4. Remove the battery pack. Reinstall the battery compartment cover during transport to protect from damage.
5. Loosen the tiller adjustment knob and lower the tiller to its lowest point, then tighten the tiller adjustment knob.
ASSEMBLY
To assemble the Travel Scooter
:
1. Loosen the tiller adjustment knob, raise the tiller to its desired position and retighten the tiller adjustment knob.
2. Turn the tiller lock knob to its UNLOCKED position.
See figure 6
.
3. Install the battery pack and battery compartment cover.
4. Install the seat.
5. Install the basket.
Figure 16. Travel Scooter Components
BATTERY COMPARTMENT
COVER
MAIN FRAME
BASKET
SEAT
BATTERY PACK
