Pride Jazzy 600 2S Owner'S Manual Download

Page: 4 / 44

www.pridemobility.com

Jazzy 600 Series

I . I N T R O D U C T I O N

SAFETY

WELCOME to Pride Mobility Products (Pride). The power chair you have purchased combines state-of-the-art

components with

safety

, comfort, and styling in mind. We are confident that these design features will provide

you with the conveniences you expect during your daily activities. Once you understand how to

safely

operate

and care for your power chair, it should give you years of trouble-free operation and service.

Read

and

follow

all instructions, warnings, and notes in this manual before attempting to operate your power chair

for the first time. You must also read all instructions, warnings, and notes contained in any supplemental instruc-

tional booklets for the controller, front riggings, and/or seating system that accompanied your power chair before

initial operation. Your

safety

depends upon you, as well as your provider, caretaker, or healthcare professional in

using good judgment.

If there is any information in this manual which you do not understand, or if you require additional assistance for

setup or operation, please contact your authorized Pride Provider.

Failure to follow the instructions in this

manual and those located on your power chair can lead to personal injury and/or damage to the power

chair, including voiding the warranty.

PURCHASER’S AGREEMENT

By accepting delivery of this product, you promise that you will not change, alter, or modify this product or

remove or render inoperable or unsafe any guards, shields, or other safety features of this product; fail, refuse, or

neglect to install any retrofit kits from time to time provided by Pride to enhance or preserve the safe use of this

product.

SHIPPING AND DELIVERY

Before using your power chair, make sure your delivery is complete as some components may be individually

packaged. If you do not receive a complete delivery, please contact your authorized Pride Provider immediately.

Where damage has occurred during transport, either to the packaging or content, please contact the delivery com-

pany responsible.

INFORMATION EXCHANGE

We want to hear your questions, comments, and suggestions about this manual. We would also like to hear about

the safety and reliability of your new power chair, and about the service you received from your authorized Pride

Provider.

Please notify us of any change of address, so we can keep you apprised of important information about safety,

new products, and new options that can increase your ability to use and enjoy your power chair. Please feel free

to contact us at the address below:

USA:

Canada:

Pride Mobility Products Corporation

Pride Mobility Products Company

Attn.: Customer Care Department

380 Vansickle Road Unit 350

182 Susquehanna Avenue

St. Catharines, Ontario L2R 6P7

Exeter, PA 18643-2694

1-888-570-1113

[email protected]

1-800-424-8205

NOTE: If you ever lose or misplace your product registration card or your copy of this manual, contact us and

we will be glad to send you a new one immediately.

Summary of Contents for Jazzy 600 2S













































Search results

Summary of Contents for Jazzy 600 2S

Reviews:

Related manuals for Jazzy 600 2S

Brands by name

Popular brands

Pride Jazzy 600 2S, Owner'S Manual

Search results

Summary of Contents for Jazzy 600 2S

Reviews:

Related manuals for Jazzy 600 2S

Brands by name

Popular brands