Pride Jazzy 1170XL Owner'S Manual Download

Page: 4 / 52

www.pridemobility.com

Jazzy 1170XL

I . I N T R O D U C T I O N

SAFETY

WELCOME to Pride Mobility Products Corporation (Pride). The product you have purchased combines

state-of-the-art components with

safety

, comfort, and styling in mind. We are confident the design features

will provide you with the conveniences you expect during your daily activities. Understanding how to

safely

operate and care for this product should bring you years of trouble free operations and service.

Read and follow

all instructions, warnings, and notes in this manual and all other accompanying literature

before attempting to operate this product for the first time. In addition, your

safety

depends upon you, as

well as your provider, caretaker, or healthcare professional in using good judgement.

If there is any information in this manual which you do not understand, or if you require additional assis-

tance for setup or operation, please contact your authorized Pride Provider.

Failure to follow the instruc-

tions, warnings, and notes in this manual and those located on your Pride product can result in

personal injury or product damage and void Prides product warranty.

PURCHASERS AGREEMENT

By accepting delivery of this product, you promise that you will not change, alter, or modify this product or

remove or render inoperable or unsafe any guards, shields, or other safety features of this product; fail,

refuse, or neglect to install any retrofit kits from time to time provided by Pride to enhance or preserve the

safe use of this product.

INFORMATION EXCHANGE

We want to hear your questions, comments, and suggestions about this manual. We would also like to hear

about the safety and reliability of your new Pride product, and about the service you received from your

authorized Pride Provider. Please notify us of any change of address, so we can keep you apprised of

important information about safety, new products, and new options that can increase your ability to use and

enjoy your Pride product. Please feel free to contact us at the address below:

Pride Mobility Products Corporation

Attn.: Customer Care Department

182 Susquehanna Ave.

Exeter, PA 18643-2694

NOTE: If you ever lose or misplace your product registration card or your copy of this manual, contact

us and we will be glad to send you a new one immediately.

Summary of Contents for Jazzy 1170XL





















































Search results

Summary of Contents for Jazzy 1170XL

Reviews:

Related manuals for Jazzy 1170XL

Brands by name

Popular brands

Pride Jazzy 1170XL, Owner'S Manual

Search results

Summary of Contents for Jazzy 1170XL

Reviews:

Related manuals for Jazzy 1170XL

Brands by name

Popular brands