Pride jazzy 1120 Owner'S Manual Download Page 50

Page: 50 / 59

www.pridemobility.com

Jazzy 1120/RevE/Feb03

X . C A R E A N D M A I N T E N A N C E

To replace the batteries:

1. Turn the power off.

2. Unplug the controller wire harness.

3. Remove the seat.

4. Remove the shroud.

5. Loosen the wing nuts on the positive (red) battery terminals

first.

6. Remove the wires.

7. Loosen the wing nuts on the negative (black) battery termi-

nals.

8. Remove the wires.

9. Replace the batteries.

10. Install the batteries into your Jazzy 1120 with the terminal sides of the batteries facing inward, towards each other.

11. Connect the wire marked (+) to the closest positive (red) battery terminal.

12. Connect the wire marked (-) to the closest negative (black) battery terminal on the other battery.

13. Connect one circuit breaker harness to the empty positive terminal of one battery, and connect the other circuit

breaker harness to the empty negative terminal of the other battery.

MOTOR BRUSHES

The electric motors that power your Jazzy 1120 use carbon brushes. These brushes may become susceptible to

wear over a long period of time. The motor brushes are the two contacts located inside the motor assembly that

supply power to the motor. They are designed to provide several thousand hours of operation. However, if the

brushes become dirty with carbon deposits or wear out, the motor will run poorly or not at all. We recommend that

your authorized Pride provider inspect the brushes every six months, or sooner if your Jazzy 1120 runs poorly.

CAUTION! If inspection determines excessive wear on the brushes, they must be replaced or

motor damage will result. Failure to maintain the brushes could void the warranty.

To inspect or replace the motor brushes:

1. Remove the seat, body shroud, and batteries. See VII.

Disassembly.

2. Unscrew the motor brush caps. See figure 49.

3. Remove the brushes.

4. Inspect for wear.

5. Replace brushes, if necessary. Contact your authorized Pride provider for replacement brushes.

Figure 49. Motor

MOTOR BRUSH CAP

WARNING! Make sure you tighten the fasteners so that the connections are secure.

Summary of Contents for jazzy 1120




























































Search results

Summary of Contents for jazzy 1120

Reviews:

Related manuals for jazzy 1120

Brands by name

Popular brands

Pride jazzy 1120, Owner'S Manual

Search results

Summary of Contents for jazzy 1120

Reviews:

Related manuals for jazzy 1120

Brands by name

Popular brands