Pride Euro Seat 2, Basic Operation Instructions

Page: 19 / 28

Basic Operation Instructions 19
www.pridemobility.com Euro Seat 2
11. Use wire ties to secure the controller harness and the manual recline
lever cable to your seating system.
12. Route the controller harness along the seat frame and reconnect the
controller. See figure 15.
To change the controller extension:
1. Turn off the power to the controller.
2. Loosen the setscrews on the mounting assembly located on the armrest.
See figure 13 or 14.
3. Slide the controller into or out of the mounting assembly to the desired position.
4. Tighten the setscrews to secure the controller in the mounting assembly.
Figure 13. Controller Position
Adjustment - Mounting Block
Figure 15. Harness Routing
SETSCREWS
FIGURE 8
CLAMP
ASSEMBLY
Figure 14. Controller Position
Adjustment - Figure 8 Assembly
MOUNTING BLOCK
MOUNTING SCREWS
SETSCREWS