Pride Mobility Victotory XL, Owner'S Manual, Page: 29 / 34

29
Victory XL
X . C A R E A N D M A I N T E N A N C E
Your Victory XL requires a minimal amount of care and maintenance. If you do not feel confident in your ability
to perform the maintenance listed below, you may schedule inspection and maintenance with your authorized
Pride provider.
The following areas require periodic inspection and/or care and maintenance.
Tyre Pressure
n
We recommend you maintain the tyre pressure at 30 psi for optimum Scooter performance.
Overinflating a tyre can cause it to explode.
Tyre Condition and Tread Wear
n
Regularly inspect your Victory XL’s tyres for signs of wear.
n
Use a rubber conditioner on your Victory XL’s tyres to preserve them.
Do not put rubber conditioner on tread area of tyres; the tyres may become dangerously
slippery.
Removable Floormats
n
Your Victory XL’s carpet floormat is held on with Velcro fasteners and may be removed, cleaned, and
reinstalled as necessary.
Exterior Surfaces
n
Bumpers and trim benefit from an occasional application of rubber or vinyl conditioner.
n
Do not use rubber or vinyl conditioner on your Victory XL’s vinyl seat; it may become dangerously slippery.
Battery Terminal Connections
n
Ensure the terminal connections remain tight and uncorroded.
n
Ensure the batteries sit flat in the battery wells.
n
Ensure the battery terminals face the rear of your Victory XL.
Wiring Harnesses
n
Regularly check all wiring connections.
n
Regularly check all wiring insulation, including the charger power cord, for wear or damage.
n
Repair or replace any damaged connector, connection, or insulation before you use your Victory XL.
ABS Plastic Shrouds
n
Apply a light coat of car wax to the shrouds to help retain their high gloss; the shrouds are formed from
durable ABS plastic and are coated with an advanced formula urethane paint.