Pride Mobility TRAVEL MATE, Owner'S Manual

Page: 21 / 39

Travel Mate www.pridemobility.com 21
I I I . Y O U R T R A V E L S C O O T E R
To adjust the width of the armrests:
1. Loosen the armrest adjustment knobs located at the rear of the seat.
2. Slide the armrests in or out to the desired width.
3. Tighten the armrest adjustment knobs as required.
NOTE: The armrests can also pivot upwards to aid in getting onto and off of the Travel Scooter.
REAR SECTION COMPONENTS
The manual freewheel lever, anti-tip wheels, motor/transaxle assembly, and charging system components are
located on the rear section of your Travel Scooter. See figure 8.
Manual Freewheel Lever
WARNING! Before placing your Travel Scooter into or taking it out of freewheel
mode, remove the key from the key switch. Never sit on a Travel Scooter when it is
in freewheel mode. Never put a Travel Scooter in freewheel mode on any incline or
decline.
Whenever you need or want to push your Travel Scooter for short distances, you can put it in freewheel mode. The
manual freewheel lever is located at the top right of the rear section.
1. Push forward on the manual freewheel lever to disable the drive system and the brake system. You may now
push your Travel Scooter.
2. Push rearward on the manual freewheel lever to reengage the drive and the brake systems; this takes your
Travel Scooter out of freewheel mode.
WARNING! When your Travel Scooter is in freewheel mode, the braking system is
disengaged.
!
Disengage the drive motors only on a level surface.
!
Ensure the key is removed from the key switch.
!
Stand to the side of the Travel Scooter to engage or disengage freewheel
mode. Never sit on a Travel Scooter to do this.
!
After you have finished pushing your Travel Scooter, always return it to the drive mode
to lock the brakes.
Figure 8. Rear Section
ANTI-TIP WHEELS
MANUAL FREEWHEEL LEVER
MOTOR/TRANSAXLE ASSEMBLY