background image

56

www.quantumrehab.com

Quantum 1107

I X .   W A R R A N T Y

RECONDITIONED UNITS WARRANTY

All reconditioned units are covered by a six-month warranty from Pride effective from the date of purchase.

WARRANTY EXCLUSIONS

This warranty does not extend to those items which may require replacement due to normal wear and tear.

!

ABS Plastic shrouds

Motor brushes

Upholstery and seating

!

Brake Pads

Tires and tubes

Fuses/Bulbs

!

Circumstances beyond the control of Pride

!

Labor, service calls, shipping, and other charges incurred for repair of the product, unless specifically authorized, IN
ADVANCE, by Pride Mobility Products Corporation

!

Repairs and/or modifications made to any part without specific consent from Pride

Exclusions also include components with damage caused by:

!

Contamination

!

Abuse, misuse, accident, or negligence

!

Battery fluid spillage or leakage

!

Commercial use, or use other than normal

!

Improper operation, maintenance, or storage

NOTE: Gradual deterioration in performance because the battery has been left in a discharged state, left in
cold conditions for an extended period of time, or worn out through heavy use is not covered.

SERVICE CHECKS AND WARRANTY SERVICE

Warranty service must be performed by a Quantum Rehab Specialist. Do not return faulty parts to Pride without prior
written authorization. All transportation costs and shipping damage incurred while submitting parts for repair or replacement
are the responsibility of the purchaser.

Failure to follow the instructions, warnings, and notes in the owner’s manual and those located on your Pride product can
result in personal injury or product damage and will void Pride’s product warranty.

There is no other express warranty.

IMPLIED WARRANTIES

Implied warranties, including those of merchantability and fitness for a particular purpose, are limited to one (1) year from
the date of purchase and to the extent permitted by law. Any and all implied warranties are excluded. This is the exclusive
remedy. Liabilities for consequential damages under any and all warranties are excluded.

Some states do not allow limitations on how long an implied warranty lasts or do not allow the exclusion of limitation
incidental or consequential damages. The above limitation or exclusion may not apply to you.

This warranty gives you specific rights, and you may also have other rights which vary from state to state.

Please fill out and return the product registration card to Pride. This will aid Pride in providing the best possible technical
and customer service.

Summary of Contents for Quantum Dynamo 1107




























































Reviews: