19
Pathrider
www.pridemobility.com
I I I . Y O U R S C O O T E R
TILLER CONSOLE
The tiller console houses all of the controls needed to drive your scooter, including the speed adjustment dial, key switch,
battery condition meter, status LED, horn buttons, lights switch, and the throttle control lever. See figure 4.
PROHIBITED! Do not expose the tiller console to moisture. In the event that the tiller
console does become exposed to moisture, do not attempt to operate your scooter until
the tiller console has dried thoroughly.
Figure 4. Tiller Console Components
SPEED ADJUSTMENT DIAL
HORN BUTTON
BATTERY CONDITION METER
THROTTLE
CONTROL
LEVER
STATUS LED
Speed Adjustment Dial
This dial allows you to preselect and limit your scooter’s top speed.
!
The image of the tortoise represents the slowest speed setting.
!
The image of the hare represents the fastest speed setting.
Key Switch
!
Insert the key into the key switch and turn it clockwise to power up (turn on) your scooter.
!
Turn the key anticlockwise to power down (turn off) your scooter.
WARNING! If the key is turned to the “off” position while your scooter is in motion, the
electronic brakes will engage and your scooter will come to an abrupt stop!
Battery Condition Meter
When the key is fully inserted and turned clockwise to power up your scooter, this meter indicates the approximate
battery voltage strength. For further information on battery charging, see IV. “Batteries and Charging.”
Status LED
The status LED alerts you to electrical problems that may occur with the scooter. The LED remains constantly lit
while your scooter is on. If your scooter develops an electrical problem, the status LED will flash a code. See VIII.
“Basic Troubleshooting” for flash codes.
LIGHTS SWITCH
KEY SWITCH
THROTTLE
CONTROL
LEVER
HORN BUTTON