19
Figure 15. Removal and Installation of Go-Chair Battery Box
NOTE: Turn off the power to the controller and remove the seat before removing the Go-Chair bat-
tery box.
1. TO REMOVE THE BATTERY BOX, GRASP THE BATTERY
BOX HANDLE AND LIFT UP TO DISENGAGE THE BOX FROM
THE POWER BASE.
2. TILT THE BATTERY BOX FORWARD SLIGHTLY.
3. LIFT THE BATTERY BOX AWAY FROM THE POWER BASE.
4. TO INSTALL THE BATTERY BOX, GRASP THE BATTERY BOX
HANDLE AND TILT THE BOX FORWARD SLIGHTLY.
5. PLACE THE BATTERY BOX ON THE POWER BASE.
6. PUSH THE BACK OF THE BATTERY BOX DOWN UNTIL IT IS
FIRMLY IN PLACE.
