Using your Dream Player LITE
PRICOM Design
Page 14
4.2 Trigger Input Configuration
*This would be perfect if you put the LITE in a high traffic area where people may be
pushing the button quite often and complete playback of the audio track is essential. With
this feature you may elect to have the LITE ignore all outside triggers until the track
finishes. This means you could have a thousand people walk by and push the button but
the sound will continue to play for the person that initially played that track regardless of
what people ask of it.
Feature
Description
Loop While Trigger Just as its name implies this feature will make the LITE continue to
loop the file and play it over and over so long as the button/input is
active. If you are using a button as your input, then if you press and
hold the button the file will play continuously. Release the button and
the file will play to the end and then stop.
High Trigger
Instead of playing the file when the trigger input is closed, this reverses
the trigger logic so that it plays when open. With a button as an
example of input then the file will play when the button is released
“open” and then stop playback when you press the button “closed”.
This is a great option for motion detectors.
NO Retrigger
Once a file is playing the trigger input is ignored until the file has
completed playing. Also great for motion detectors.*
Toggle Trigger
Using the toggle trigger feature allows you to switch between two files
on the same device. Switching between a Daytime track and a
nighttime track is a good example. This is done by using a switch
connected to the trigger input. Now it has to be a switch, a button will
not work.
