EN
G
LI
SH
ENGLISH
4
2
3
PRELIMINARY STEPS
5
6
Thank you for purchasing this Price Pfister product. All Price Pfister products are carefully engineered, and factory tested to
provide long trouble-free use under normal conditions. This product is easy to install using basic tools and our easy to follow
illustrated instructions. If you have any questions regarding this product, call 1-800-Pfaucet (1-800-732-8238).
1 BEFORE PROCEEDING
WARNING:
Read all the instructions completely before proceeding. Price Pfister
recommends calling a professional if you are uncertain about installing this product!
This product should be installed in accordance with all local and state plumbing and
building codes.
2 SHUT OFF WATER SUPPLY
Locate water supply inlets and shut off the water supply valves. These are usually found
under the sink or near the water meter. If you are replacing an existing faucet, remove
the old faucet from the sink and clean the sink surface thoroughly.
3 TOOLS RECOMMENDED
• Plumber's putty
• Philips head screwdriver
• Pliers
• Adjustable wrench
• Flashlight
• Cloth
Your installation may require new supply lines and/or shut-off valves or other additional
tools.
4 CHECKING THE CONTENTS OF THE BOX
Upon opening the box, check to ensure that all of the following items are included:
A
Spout Body
B
Valve Bodies (2X)
C
Pull-Out Hose
D
Spray Head
E
Hose
F
Putty Rings (3X)
G
Square Washers (3X)
H
Locknuts (3X)
J
Clips (2X)
K
Weight
L
Quick Connector
If any of these items are missing, please contact Price Pfister Consumer Services at
1-800-Pfaucet (1-800-732-8238).
6 HANDLE BODY ATTACHMENT
Slide the Handle Connectors (
6A
) onto the Spout Bridge (
6B
). Push the Handle
Connectors (
6A
) all the way until completely seated. Be careful not to damage O-Rings
(
6C
). The HOT Handle Body, labeled with Red Tag (
6D
), should be positioned to the
left side of the spout.
5 VALVE BODY ATTACHMENT
Remove Clip (
5A
) from Valve Body (
5B
) and save.
2
6B
A
B
C
D
E
G
K
L
F
H
J
5A
5A
5B
5B
6A
6A
6B
6D
6C
6C
