background image

Restocking Policy

Page v

Warranty Policy

All product returned to Pribusin Inc. in prime condition (not

damaged, scratched or defaced in any way) within seven (7)

months from the original date of shipment is subject to a 50%

restocking charge. All product must be accompanied by a

Return Authorization number (RA number) which must be

obtained from Pribusin Inc. prior to returning any product.

After seven (7) months from the original date of shipment,

products cannot be returned for restocking.

Custom designed products, modified products or all non-

standard products may not be returned for restocking.

Pribusin Inc. warrants equipment of its own manufacture to be

free from defects in material and workmanship, under normal

conditions of use and service, and will replace any component

found to be defective, on its return to Pribusin Inc.,

transportation charges prepaid, within one year of its original

purchase.

Pribusin Inc. will extend the same warranty

protection on equipment, peripherals and accessories which is

extended to Pribusin Inc. by the original manufacturer. Pribusin

Inc. also assumes noliability, expressed or implied, beyond its

obligation to prelace any component involved. Such warranty

is in lieu of all other warranties, expressed or implied.

Summary of Contents for ITC-79-FTF Series












Reviews: