background image

SUPER NODE™ USER MANUAL

1

FOREWORD

Warranty/Repairs

PRG warrants its products for 1 year from the date of shipment, unless otherwise noted on the face hereof in 
accordance with the following:

1)

PRG warrants its products against defects in workmanship and materials, under normal use, for a period of one 
year from the time of delivery to the Customer. During this period, if any product is found to be defective or fails to 
operate in accordance with PRG’s published specifications for the product in effect as of the date of shipment, 
PRG will repair or replace the product, subject to the terms of this limited warranty. The warranty will be null and 
void under the following conditions: (a) improper or inadequate maintenance; (b) unauthorized modifications or 
misuse; (c) operations outside of environmental specifications for the product.

2)

This Warranty does not cover any product or product part damaged by or subject to accident, negligence, 
alteration, abuse or misuse, or any accessories or parts not supplied by PRG. This Warranty shall not apply to any 
damage to any product, or product part caused by or due to an act of God, any catastrophe resulting from 
earthquake, fire, flood, explosion or any other cause beyond the control of PRG. This warranty does not cover 
“consumable” parts such as fuses, lamps, color media or components which may be warranted directly to the 
Customer by the original manufacturer. PRG’s warranty does not extend to items not manufactured by PRG. 
Freight terms on warranty repairs are FOB PRG factory in Dallas Texas or other PRG designated repair facility. 
Collect shipments or freight allowances will not be accepted.

3)

PRG’s sole responsibility under this warranty shall be to repair or replace at PRG’s option such parts as shall be 
determined to be defective on PRG’s inspection. Such repairs may be performed with re-worked or refurbished 
parts. PRG will not assume any responsibility for any labor expended or materials used to repair any equipment 
without PRG’s prior written authorization. NO OTHER WARRANTY, EXPRESS OR IMPLIED, APPLIES TO THE 
PRODUCT, INCLUDING BUT NOT LIMITED TO WARRANTY OF QUALITY, FITNESS FOR A PARTICULAR 
PURPOSE OR MERCHANTABILITY. PRG SHALL NOT BE RESPONSIBLE FOR ANY INCIDENTAL, SPECIAL, 
GENERAL OR CONSEQUENTIAL DAMAGES, DAMAGES TO PROPERTY, DAMAGES FOR LOSS OF USE, TIME, 
PROFITS OR INCOME, OR ANY OTHER DAMAGES.

4)

The Customer’s obligations during the warranty period under this warranty are to notify PRG of any suspected 
defect and to return the goods prepaid to PRG at PRG’s depot in Dallas, Texas or authorized service center. In the 
event the defect is not covered under the warranty, as determined by PRG at its reasonable discretion, PRG will 
charge for the parts, materials and labor at rates as in effect from time to time.

5)

(a) THIS WARRANTY IS CONTINGENT ON THE CUSTOMER’S FULL AND TIMELY COMPLIANCE WITH THE 
TERMS OF USE AND PAYMENT SET FORTH HEREIN.

(b) This written warranty is intended as a complete and exclusive statement of the terms thereof. Prior dealings or 
trade usage shall not be relevant to modify, explain or vary this warranty.

(c) To obtain warranty service contact PRG at 214-819-3100, [email protected], or via mail at 
Production Resource Group, 8617 Ambassador Row, Suite 120, Dallas, Texas 75247.

6)

For sales outside of North America, the relevant PRG repair location shall be listed on the face of your invoice.

Summary of Contents for SUPER NODE 20.9821.0001



























Reviews: