Operation Method
T.O.2
| 27
4.5 Installation and Removal of the Base
Remove of the base
Installation of the
base
1. Turn the screw on knob
a
outward using
flat screw driver until it no more limits
position.
2. Turn knob
a
counter-clockwise, holding
the base with one hand and take the
main body of the instrument off the
base.
a
1. Turn the knob
a
counter-clockwise until
it reaches the position limit.
2. Make the positioning block
b
on the
main body of the instrument in line with
the notch
c
on the base and install the
main body onto the base as shown.
3. Turn the knob
a
clockwise until it
reaches the position limit so that the
mark points downward.
4. Turn the screw until it can limit position.
b
c
