PREVOST X3-45 2011, Operator'S Manual

Page: 107 / 214

Other Features 101
4.
Average Trip Speed
This function displays the average speed for the
current travel. The average trip speed is
calculated as the distance traveled divided by
the time the engine has been running (since the
last reset). Two average trip speeds can be
measured. Use Reset function before each new
travel to start new measurements.
5. Estimated Time of Arrival (ETA)
This function will display the estimated time of
arrival if the distance to be traveled is entered
first, in this menu. To set distance to be traveled,
press ENTER and enter the distance left to drive
in mile or km using the DID control buttons.
VEHICLE MESSAGES
Use this function to consult the vehicle active
messages that were previously displayed as
pop-up messages and then acknowledged.
When consulting a message, the corresponding
STOP, CHECK or INFORMATION warning light
will illuminate. Scroll through the messages
using the up/down button. Press ESC button to
return to main menu.
RESET TRIP DATA
When the Reset Trip Data menu is open,
pressing and holding down the Enter button for
more than 1 second resets the functions listed
below. This function will permit to the system to
calculate new value from the point of resetting.
- Trip Fuel Used
- Average Trip Speed
NON-DRIVING/STATIONARY MODE MENUS
DISPLAY SETTINGS
The Display Settings menu is used to change
languages and units. The password, time and
date can also be changed. The backlight and
contrast of the display screen can be adjusted.
1. Language
2. Units
Use this function to select desired unit formats
for: