Dust
Collector
Start and Operation Control
• Intermittent Operation:
Connect the plug into the power outlet.
Press the switch (
A
) to start the tool.
To stop the tool, simply release the switch.
• Continuous Operation:
Connect the plug into the power outlet.
Press the switch (
A
) and block it pressing the continuous use button (
B
).
To stop the tool, press and release the switch.
Adjust the Cutting Angle
• Disconnect the unit from the power source.
• Loosen 2 screws (
C
) in the shoe base using the
Allen key included.
• When the screws are loosened adjust the base
into the desired angle according to the scale
marked in the shoe.
• Tighten back the screws.
• Set the Hex key in its support set in the power
cord immediately after using it.
Vacuuming Particles
• Connect a vacuum cleaner to the tool using the vacuum
cleaner connection to vacuum clean dust, saw dust or any
particle from the work piece.
Lubrication
• Apply regularly one drop of lubricant to the guide roller to
gain an adequate sliding of the saw blade while cutting.
Start Up
7
A
B
ENGLISH
C
Summary of Contents for 24047
Page 9: ...Notas 9 ESPAÑOL ...
Page 22: ...Notes 9 ENGLISH ...
