Symptom
Possible Cause / Remedy
Unit not functioning
when used with USB
receiver.
Unit works erratically
or intermittently.
• Batteries flat - replace.
• Out of range - move S
END
closer to receiver.
• Interference- place both
SEND
and receiver unit
away from sources of interference.
Units will not Pair- LED
is extinguished after 30
seconds.
• Batteries flat - replace.
• Ensure
SEND
is close to receiver
(e.g. 1 metre/ 1 yard) while pairing.
INSTRUCTIONS
SimplyWorks
®
Pack Contents
Carefully check the contents
of the box, which are:
SEND
This manual
SEND
Your
SEND
is warranted against defects in manufacture or component failure. The unit is designed for
domestic and educational applications. Use outside these areas will invalidate the warranty.
Unauthorised repair or modification, mechanical abuse, immersion in any liquid or connection to
incompatible equipment will also invalidate the warranty.
If your
SEND
does not operate correctly, please use the following guide to determine the cause. If, after
following this guide, your unit still does not operate, please contact your supplier before returning it.
Troubleshooting
Warranty
Unit not functioning
when used with
stand-alone receiver.
• Units are not Paired - follow procedure
in Pairing section.
• Batteries flat - replace.
• Units are not Paired - follow procedure
in Pairing section.
• Batteries flat - replace
SimplyWorks is the world’s first fully integrated
wireless system specifically for users with motor
skills difficulties.
SimplyWorks allows you the freedom to create
wire-free,
single
or
multi-user
learning
environments, reducing set up time and allowing you
to concentrate on the learning tasks themselves.
SEND
may be used with any of the SimplyWorks
receivers to give switch access using any of the
various switches that are available, provided they
are fitted with a standard 3.5mm jack plug.
SEND
is simple to operate but to ensure you get the
most from your purchase, please take time to read
this instruction booklet.
Product Description
Features
• Mouse Emulation capability
• 10 metre (32’) operating range.
• Integrated LED display to allow switch function
to be selected when used for computer access.
• Automatic power saving mode- no on/off switch.
• Long battery life.
INPUT
PAIR
MODE
SEND
• Works with any
SimplyWorks
®
receiver for
computer or stand-alone switch access.
• Single 3.5mm jack socket input from
any switch.
• Identical functions to SimplyWorks
SWITCH 125 but allowing other types
of switch to be used such as foot switches,
sip/puff switches etc.
Unit 37 Corringham Road Industrial Estate
Gainsborough Lincolnshire DN21 1QB United Kingdom
Tel +44 (0) 1427 678990 Fax +44 (0) 1427 678992
www.pretorianuk.com
SimplyWorks® is a registered trademark of Pretorian Technologies Ltd.
S040017:1
The function of a switch paired with a stand alone receiver is implicit and
does not need to be programmed. It does not matter which Mode
SEND
is
set to, it will Simply Work!
Operating with a stand-alone Receiver
Your
SEND
has no user serviceable parts. If repair is necessary
the unit should be returned to Pretorian Technologies or an
authorised Distributor.
Maintenance
B
C
A
INPUT
PAIR
MODE
SEND