PRESYS
Instruments
PCON-Y17
Page 38
2.1.12. Leakage / Stability Test
The leakage / stability test measures the variation of a signal for a certain time. It
is useful, for example, to check for pressure leak in the system.
To do the test, put the PCON-Y17 in
Measure
mode (the pressure control valves
are off) and select the
Input (Auxiliary)
desired (the leakage / stability test may be done
with any of the Auxiliary Input signals, for testing the pressure in the control module
select
PRESSURE
→
C1
).
Fig. 50
- Leak test, select MEASURE mode and the Auxiliary Input
Press the
Quick Navigator
icon
→ MENU → BAR GRAPH
.
Fig. 51
- Menu (Quick Navigator)
presys
