P r e s t o n C i n e m a S y s t e m s
Horizon Bracket:
1. Install the Horizon bracket to the lens with the four included 4-40 x 5/16” cap head
screws
2. Screw the Revolution Support Post into the bottom of the Horizon Bracket.
3. Install the eccenter in the bracket as shown above. Attach the motor gear with the
three 4-40 x 3/8" flat head screws included.
4. Attach the Kipp handle to bracket. (do not tighten yet.)
5. Install the motor so that the angled section of the motor housing meets the eccenter
as shown above.
6. Align the motor to the gear. Turn the eccenter so that the motor gear meshes with
the lens gear. Tighten the Kipp handle when the motor is properly fitted to the lens
