PRESTO OWNER’S MANUAL
Page 16
POWER STAK
CODE
PROGRAMMER LCD DISPLAY
EFFECT OF FAULT
POSSIBLE CAUSE
12
Controller Overcurrent
Shutdown Motor;
Shutdown Main Contactor;
Shutdown EM Brake;
Shutdown Throttle;
Full Brake;
Shutdown Pump.
1. External short of phase U,V, or W motor connections.
2. Motor parameters are mis-tuned.
3. Controller defective.
4. Speed encoder noise problems.
13
Current Sensor Fault
Shutdown Motor;
Shutdown Main Contactor;
Shutdown EM Brake;
Shutdown Throttle;
Full Brake;
Shutdown Pump.
1. Leakage to vehicle frame from phase U, V, or W (short motor stator).
2. Controller defective.
14
Precharge Failed
Shutdown Motor;
Shutdown Main Contactor;
Shutdown EM Brake;
Shutdown Throttle;
Full Brake;
Shutdown Pump.
2. External load on capacitor bank (B+ connection terminal) that prevents
the capacitor bank from charging.
1. See Monitor menu Battery: Capacitor Voltage.
15
Controller Severe Undertemp
Shutdown Motor;
Shutdown Main Contactor;
Shutdown EM Brake;
Shutdown Throttle;
Full Brake;
Shutdown Pump.
1. See Monitor menu Controller: Temperature.
2. Controller is operating in an extreme environment.
16
Controller Severe Overtemp
Shutdown Motor;
Shutdown Main Contactor;
Shutdown EM Brake;
Shutdown Throttle;
Full Brake;
Shutdown Pump.
1. See Monitor menu Controller: Temperature.
2. Controller is operating in an extreme environment.
3. Excessive load on vehicle.
4. Improper mounting of controller.
17
Severe Undervoltage
Reduced drive torque.
1. Battery Menu parameters are misadjusted.
2. Non-controller system drain on battery.
3. Battery resistance too high.
4. Battery disconnected while driving.
5. See Monitor menu Battery: Capacitor Voltage.
6. Blown B+ fuse or main contactor did not close.
18
Severe Overvoltage
Shutdown Motor;
Shutdown Main Contactor;
Shutdown EM Brake;
Shutdown Throttle;
Full Brake;
Shutdown Pump.
1. See Monitor menu Battery: Capacitor Voltage.
2. Battery menu parameters are misadjusted.
3. Battery resistance too high for given regen current.
4. Battery disconnected while regen braking.