Presto Lifts
PPS2200-62NAS Manual
33
22. Daily Operator Checklist
CHARGE CONDITION/BATTERY CHECK LIST
1. Check Battery Discharge Indicator (Fuel Gage and Hour Meter) – Be sure unit is showing
proper Charge Level before operating unit
2. Check to be sure Charging Cord is Unplugged and properly stowed before operating unit
3. Inspect Battery Wire Connections – All connections should be tight with No Corrosion
(white powder) showing at the Battery Terminals
4. Inspect Battery Case – There should be no cracks or visible damage to the Battery Case
WALK AROUND INSPECTION
5. Check general condition of Stacker (loose or broken parts, oil, dangling wires, dents,
cracked covers etc.)
6.
Check metal frame, mast, carriage and font load supports for cracked welds, worn or flat
rollers, loose or disconnected chains, loose pins, missing snap rings, and loose or missing
hardware – bolts, nuts washers etc.
7. Check for evidence of hydraulic leaks
8. Make sure all precautionary labeling is in place and legible
FUNCTIONAL INSPECTION
9. Check Drive – Forward and Reverse Function
10. Check Lift – Up and Down Function
11. Check Function for Belly Button Reverse
12. Check Horn Function
13. Check Brake Function
DO NOT USE OR OPERATE STACKER IF ANY FUNCTION IS NOT
OPERATING PROPERLY OR IF STACKER APPEARS UNSAFE
IN ANY WAY!
REPORT CONCERNS TO SUPERVISOR IMMEDIATELY!
OPERATOR ID _____________________________
DATE _______________
