background image

PAGE 3 OF 27 

0720 IH-1819VND

H-1819

OWNER’S MANUAL        

 Page 3

          M100, M200, M300 & M400 FOOT OPERATED LIFTS

Limited Warranty Policy

Presto Lifts warrants this product to be free from defects in material or workmanship for the duration 

of the warranty period. Warranty periods vary and begin on the date of shipment. For specific warranty 

information, contact Presto Lifts with the machine’s serial number.

Any claim for breach of this warranty must be received in writing by Presto Lifts within the warranty 

period. Warranties shall not cover failure or defective operation, caused by misuse, misapplication, 

negligence or accident, exceeding recommended capacities, or any alteration or repair of the item pur-

chased which has not been authorized by Presto Lifts. Except as set forth herein, Presto Lifts makes no 

other warranties, express or implied, including THE WARRANTIES OF MERCHANTABILITY AND 

OF FITNESS FOR A PARTICULAR PURPOSE, all of which ARE HEREBY EXCLUDED.

Presto Lifts meets the labeling requirements of California’s Proposition 65. Presto Lifts makes no war-

ranty or representation with respect to the compliance of any product with other State or local safety 

or product standard codes and any failure to comply with such codes shall not be considered a defect 

of material or workmanship under this warranty. Presto Lifts shall not be liable for any direct or conse-

quential damages arising out of such non-compliance.

Presto Lifts’ obligations under any warranty or for any other damages which may arise under any sale, 

agreement, or contract, are limited to the replacement or repair of defective components at its factory 

or another location at Presto Lifts’ discretion. This is buyer’s sole remedy under any such warranty, sale, 

agreement, or contract. Presto Lifts will not be liable for consequential, incidental, exemplary, or puni-

tive damages of any kind resulting from a breach of any warranty that it has provided or for breach of 

any term of any sale, agreement, or contract. Any warranty may be altered only in writing by Presto 

Lifts.

All commodities, software, or technology purchased from Presto Lifts are subject to the export and 

re-export control laws and regulations of the United States, including but not limited to the Export 

Administration Regulations (“EAR”) and Department of the Treasury Office of Foreign Asset Con-

trols (“OFAC”) Regulations.  Presto Lifts expects all distributors and customers to comply with these 

laws and regulations. Without limiting the foregoing, the distributor/customer cannot, without proper 

authorization from the applicable United States Government Agency, export, re-export, or transfer 

any commodity, software, or technology purchased from Presto Lifts, either directly or indirectly, to 

any entity, country, or national of any country in breach of such laws and regulations. Furthermore, 

Presto Lifts expects that the distributor/customer shall indemnify and hold harmless Presto Lifts from 

and against any claim, proceeding, action, fine, loss, cost and damages arising out of or relating to any 

noncompliance with export control regulations by distributor/customer, and distributor/customer are 

expected to compensate Presto Lifts for all losses and expenses resulting thereof, unless such noncom-

pliance was clearly not caused by fault of the distributor/customer.

Summary of Contents for H-1819




























Reviews: