Presto Lifts ECOA PDL60-50, Owner'S Manual, Page: 14 / 30

14
Presto Lifts PDL Manual
6. Once the platform has been raised and the maintenance chocks have been engaged,
verify the pins at the base of the hydraulic cylinders are properly seated.
7. Ensure the machine is level. If necessary use shims beneath the lag plates. All load
bearing points of the base frame must be fully supported by using grout beneath the base
frame.
An improperly supported base frame can cause excess wear and/or
permanent damage to the machine.
8. Anchor the machine using appropriate anchors.
CROSS HATCHING INDICATES AREAS THAT
HINGE END
ROLLER TRACKS (BOTH SIDES)
NEED TO BE SHIMMED AND/OR GROUTED,
ONCE LEVELED.
FRONT ROLL-OVER SUPPORT
SIDE ROLL-OVER
SUPPORT (BOTH SIDES)
LAG PLATES (ALL
FOUR CORNERS)
VERIFY CYLINDERS ARE
PROPERLY SEATED AFTER
MANUALLY RAISING THE
PLATFORM