The device has a built-in WiFi function. WiFi is on automatically when powering on the
device, you could use mobile phone APP to connect and operate accordingly.
Firstly, please install the APP which is provided by our company to your mobile phone.
Then power on the device, add the device to check the real-time image, also you can
record videos, take photos, playback the videos in the SD card and adjust parameter
settings. After APP connects the device successfully, the WiFi icon on the device display
will not flash.
1.
Use APP to add device. Enter into APP, then click ‘+’ button, then select the device
model, then click to switch network and redirect to mobile phone WiFi connection
setting(For iOS, need to switch to mobile phone WiFi setting manually), finally choose the
WiFi of the device (Prestigio_XXXXXX, Pass word: 12345678) to connect.
2.
Operate device via APP
5. Settings
Please download application “PlusCam” to change settings:
Wifi Settings:
Wifi name: Prestigio_XXXXXXX, WiFi Password: 12345678
Subtitle: on/off
APP Video Resolution: 720p/360p
Record Resolution: 1080p/720p
Loop recording: 1 minute/3 minutes/5 minutes. Video recording is provided in a cyclic order
and chosen periods of time. When micro SD card is full then the oldest unprotected files will
be replaced by new recorded files.
Storage Settings: Memory Card/Used Storage/Free Capacity/Total Storage
Microphone: on/off
GPS: on/off
Satellite info: on/off
Loudspeaker Volume: 0-7
Collide Sensitivity: High/Medium/Low
Motion Detection: on/off, Time-lapse recording time. DVR automatically starts recording
when motion is detected in front of camera. Recording stops when there is no movement any
more but a delay of 15-20 seconds. The function works only when power is supplied.
User Manual
RoadScanner 500WGPS
5
4. APP Operation
4
5
