EN
–
2
Roadrunner 710X
Quick Start Guide
Prestigio Roadrunner 710X
USB Port
Laser LED
Power LED
Lens
Getting started
3
.
Power on/Power off
Turn the Power Switch to “
”, buzzer beep 5 times and laser LED
lights at the same time,
the system comes into standby. Mode LED,
Power LED and Resolution LED will on.
To power off the device turn the Power Switch to “
”, hold for 3
seconds, buzzer beep 5 times and laser LED flash 5 times.
4.
Charging
Using the USB cable: Connect the device to the USB port of a
computer, the device will immediately start charging.
Using the adapter: Connect the device to the adapter, the device will
immediately start charging.
Normally it takes approximately 2-3 hours to fully charge the device.
Operating the device while charging with the AC adapter may extend
the time of full charge.
Note:
Before using the device for the first time, please, provided to fully
charge the Li-ion battery. The battery is completely charged in 2-3
hours.
If the power is low, the buzzer will keep beeps, then the device will
power off shortly.
5.
Inserting the Micro SD-card
Before starting video recording, please, insert a Micro SD card into
the Micro SD card slot in the device.
To extract the Micro SD card slightly push it inside the device, and
remove.
Note:
If there is no card inserted when the device powered on, the buzzer
will keep beeping and then power off shortly.
If there is a little space left of Micro SD card, the buzzer will keep
12
6
11
5
EN