6
User Manual | RoadRunner 400-410GPS
3
3.
Settings
Before recording, you can set up the device according to
your requirements.
-
In preview mode, press [MENU] to enter settings, then
pressing [MODE] one can to go to MOVIE settings, PICTURE
settings, PLAYBACK mode, SD tool, General settings and E-
dog settings, press [MENU] to exit.
-
In setting list, use [
▲
]/[
▼
] to navigate the menu, press [OK]
to get the
options and confirm the selection.
Video settings
•
Resolution:
Select the resolution of recorded video: FHD 1920 x 1080, 720P 1280x720,
WVGA 848 x 480.
•
Loop recording:
Set the video duration (1
, 3, 5 minutes or off) for loop recording. When
the microSD card is full, the device will delete the oldest unlocked video file
automatically.
•
WDR:
Off/On. Turn on or off
Wide-dynamic-range.
•
White Balance:
Auto, Daylight, Cloudy, Tungsten, Fluorescent. Select an appropriate white
balance, so images have a true-to-life color range. It is for specific lighting situations.
•
Motion Detection:
Off, Low Level, Middle Level, High Level.
DVR automatically starts
recording when motion is detected in front of camera. Recording stops when there is no
movement any more but a delay of 15-20 seconds. The function works only when power
is supplied.
•
Record Audio:
Off/On. Set to record sound or not.
•
Date Stamp:
Off/On. Add date stamp onto videos.
•
G-sensor:
Off, Low Level, Middle Level, High Level. Select the sensitivity of the G
-sensor.
The smaller the number is, the higher the sensitivity is. A recording video file becomes
automatically protected when collision, shake or emergency braking occurs.
PICTURE SETTINGS
•
Resolution:
Select the picture image size from 3MP, 2MP, 1.2MP, VGA.
•
Quality:
Set the photo quality Fine/Normal/Economy.
•
White Balance:
Select an appropriate white balance, so images have a true-to-life color
range. It is for specific lighting
situations. Auto, Daylight, Cloudy, Tungsten, Fluorescent.
•
ISO:
Set the ISO Auto/100/200/400.
