6
Prestigio P776 / Prestigio P796
ENG
LED
Indicates the status of monitor operation.
Green : Normal.
Amber : When power off.
Green with flicker : Power saving mode or disconnection of signal cable.
DC Power Input : 12V DC Input Terminal
RGB IN : Analog signal connector (15-pin D-sub) for use with IBM and other compatible.
RGB Audio IN : 3.5mm Stereo Input Jack to receive audio signal from PC.
7.Installation procedure:
1. Ensure the power of PC and LCD monitor are off.
2. Connect the video and audio signal of PC to their respective input terminals on monitor.
3. Connect the power cord to the power supply adapter. Then connect the output of the power supply to the DC12V
terminal of the monitor. Then plug the AC power cord to the AC power source.
4. Turn on the PC equipment.
5. Push the power switch button located at the lower right side of the bezel. Power LED light indicate monitor is work-
ing.
8.Operation Method Of Front Panel Control
The Monitor function settings are set using the On-Screen Display. To access function settings, simply press the MENU
key on the front control panel to display MENU. Press MENU to enter sub menu, and use - button to choose
item ( PICTURE, ADVANCE, OSD, INFO ). Different function settings are available for the different types of signal inputs.
The following diagram shows the different on-screen displays available for different input signals.
Press MENU to enter sub-menu as following, then using - VOL-
UME + to select items (Picture). Press \/ SELECT /\ to choose sub-
item (Contrast - Brightness - RGB Gain… ), then using - VOL-
UME + to increase or decrease the value of selected sub-item.
When you complete the adjustment, press MENU button to exit
sub-menu to select other items. You can press MENU again to
exit OSD setting.
Press MENU to enter sub-menu as following and using - VOL-
UME + button to select items (Advance). Press \/ SELECT /\ to
choose sub-item, then using - to increase or decrease
the value of selected sub-item. When you complete the adjust-
ment, press MENU button to exit sub-menu to select other
items.You can press MENU again to exit OSD setting.