9
PRESTIGIO P392
ENG
* Auto Config
* When your system is in VGA mode, press the OK to make the Auto Configure function be executed, and the system will
be set as the optimal condition after the execution.
* Input Signal Switch between Analog and Digital
While the Analog signal is “on”
* Press both < and > keys at the same time and hold the keys for one second to activate the input source of Digital,
and the DVI indicator DVI will appear in upper right corner, with the Analog Signal be disabled. Then, press both < and
> keys at the same time again, and hold the keys for one second could activate the input source of Analog back again,
and the Analog indicator D-SUB will be showed up in the upper right corner as well.
* Special Notes for DVI Input
The H- Position , V- Position and Auto Config features will be disabled in Main Menu, and all indicators’ color of H-
Position , V- Position and Auto Config will be indicated in 2 gray colors with different thickness as below.
At the same time, the Clock and Phase feature will be disabled in Sub Menu as well, and the color of both indicators’ color
Clock and Phase will be also indicated in 2 gray colors with different thickness as below.