USER MANUAL
| MultiPad 7.0 Prime Duo 3G | PMP7170B3G_DUO
7
●
You can also install and run any other third party file browser applications.
Remove the storage card
To avoid data loss or damage, please stop using files/programs in the storage card, and then tap
Settings
>
Storage
>
Unmount SD card
to remove it safely.
To remove the storage card, gently press the edge of the card to release the safety lock and pull the
card out of the slot.
[Note]:
1.
Make sure the location and direction of the storage card is correct when inserting.
2.
To avoid possible issues or incompatibility of the storage card with your MultiPad, major brands of
storage card are recommended. Never use damaged or cracked storage cards as this might damage the
MultiPad or cause loss of your data.
2.3 Hot plug of storage card
Please do not hot plug the storage card when using or browsing its files.
For example, when you are running the Music/Video Player/ Gallery, the storage card could be damaged
and files on it might be come corrupt if you take out the storage card without proper preparation. As for
details of inserting/removing storage card, see
2.2 Use the storage card
.
2.4 Memory space
The capacity of built-in flash chip is 4GB. The device contains 2 memory partitions: Internal storage
&NAND Flash storage. The space is partitioned to store apps, setting and user data. A part of storage will
be reserved for system resources and wouldn’t be available for user. The exact size of available memory
may vary depending on Firmware version.
MultiPad supports extended storage – micro SD cards of 32GB maximum capacity.
2.5 Inserting a SIM Card
The MultiPad is equipped with the SIM card slot which allows you to insert the SIM card into the unit as
shown below:
Place the SIM card on the card base and insert them into the SIM card port.