Prestigio Multicam 575w, Quick Start Manual

Page: 6 / 192

Quick Start Guide
Prestigio MultiCam
EN
•
Motion detector setup
If there is any motion detected while the car engine is stopped, your car DVR
will start recording automatically. It will stop recording when no motion can be
detected.
(1) Run MultiCam Prestigio .
(2) Go to Setup > Car DVR Settings to turn on Motion Detector , and then tap
Save
.
(3) displays on your car DVR.
Notes:
•
When car engine is stopped, use the car DVR to activate Motion Detector if
necessary.
•
G-sensor setup
If any impact takes place during recording, your car DVR will save the emergency
recording events and save the files automatically. You just need to turn on the
G-sensor.
(1) Run
MultiCam Prestigio
.
(2) Go to Setup > Car DVR Settings .
(3) Choose H/L for G-Sensor and then tap Save .
»
H : High sensitivity. L : Low sensitivity.
(4) The car DVR shows emergency record notification on the screen.
•
Connects to cloude server
Enable Cloud [ ] in the car DVR to sync video recording to a cloud server.
Connecting status will show on the screen.
Status Description
The connection is successful. The preview shows [ ]
and the car DVR ID.
Login fail:
• Invalid AP name or password.
• Weak Wi-Fi signal or not in Wi-Fi coverage.
Connection fail:
• No Internet or cloud server accessible.
• Blocked by a firewall.