70
Adding Hard Disks to a Degraded RAID Configuration
To add a hard disk to a degraded RAID configuration:
1.
Insert the hard disk into the storage system. You can do this whether the
storage system is powered on or off.
2.
Access the
Storage System Console
or refresh the browser window. The
Disk Change Notification
page appears.
3.
Click on
Add New Disk
to add the disk to the storage system.
The
Disks
page shows the progress of the rebuilding progress.
Alternatively, if the information on this page is not correct, click on
Scan
to scan
the storage system again and update the page.
You can also click on
Shut Down
to shut down the storage system. When you
restart the storage system, this page re-appears.
Summary of Contents for MNAS-4100
