Location
When selecting a position for your Larder Fridge you should make sure the floor is flat and firm, and
the room is well ventilated with an average room temperature of between 16°C and 32°C. Avoid
locating your Larder Fridge near a heat source, eg. cooker, boiler or radiator. Also avoid direct sunlight.
If you are placing your Larder Fridge in an out-building such as a garage or annex ensure that the Larder
Fridge is placed above the damp course, otherwise condensation will occur on the Larder Fridge cabinet.
Never place the Larder Fridge in a wall recess or into fitted cabinets or furniture.
When your Larder Fridge is working, the two sides may become hot. It must therefore be installed so
that there is 10mm of free space at the sides, 30mm above and 50mm behind. The Larder Fridge door
can either open to the right or the left, depending on the location which suits you. See page 5 if you
want to reverse the door swing. Do not drape the Larder Fridge with any covering.
Levelling the Larder Fridge
The Larder Fridge has 2 adjustable feet at the front and 2 castors at the back to
assist with moving. Once the Larder Fridge is put in it’s final location, make sure
it is level. Use the levelling feet at the front. If the Larder Fridge is not level, the
doors and magnetic seal alignments will be affected.
Cleaning before use
Wipe the inside of the Larder Fridge with a weak solution of bicarbonate soda. Then rinse with warm
water using a ‘wrung-out’ sponge or cloth. Wipe completely dry before replacing the shelves and
baskets. You could clean the Larder Fridge externally with wax polish.
If you require more information refer to CLEANING on page 6.
Before plugging in YOU MUST
Check that you have a socket which is compatible with the plug supplied with the Larder Fridge. If not,
see the section called ELECTRICAL CONNECTIONS on page 8.
Before switching on!
DO NOT SWITCH ON UNTIL FOUR HOURS AFTER MOVING THE LARDER FRIDGE.
The coolant fluid needs time to settle.
Before using your Larder Fridge
Before placing any food in your Larder Fridge, turn the Larder Fridge on and wait for 24 hours, to make
sure it is working properly and to allow the Larder Fridge to fall to the correct temperature. Always
follow the storage instructions on the food packaging.
Before use
Please read these instructions carefully before using your new Prestige Larder Fridge
The Larder Fridge is for indoor and domestic use only.
INTERNAL LIGHT
BOTTLE STORAGE
LEVELLING FEET
SALAD BIN
ADJUSTABLE SHELVES
2
INSTALLATION
CONTROL PANEL
SUPERCOOL BUTTON
EGG TRAY
GETTING TO KNOW YOUR LARDER FRIDGE
Summary of Contents for PRT 330 LS
Page 1: ...PRESTIGE Instructions for use Model PRT330LS ...
Page 3: ...Larder Fridge Model PRT 330 LS guidelines for use ...
Page 12: ...10 ...
Page 13: ...11 ...