Prestige PR1-SO Instructions For Use - Installation Advice Download Page 2

2

Dear Customer,

Thank you for purchasing a Prestige Oven.

The safety precautions and recommendations within this booklet

are for your own safety and that of others. They will also provide
a means by which to make full use of the features offered by your
appliance.

Please preserve this booklet carefully. It may be useful in future,

either to yourself or to others in the event that doubts should arise
relating to its operation.

This appliance must be used only for the task it has explicitly

been designed for, that is for cooking foodstuffs. Any other form
of usage is to be considered as inappropriate and therefore dan-
gerous.

The manufacturer declines all responsibility in the event of

damage caused by improper, incorrect or illogical use of the
appliance.

DECLARATION OF 

CE

CONFORMITY 

– This oven has been designed to be used only for cooking. Any other use (such as

heating a room) is improper and dangerous.

– This oven has been designed, constructed, and marketed in compliance with:  

- Safety requirements of the “Low voltage” Directive 2006/95/EC;

- Safety requirements of the “EMC” Directive 89/336/EC;

- Requirements of EEC Directive 93/68.

IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN
ACCORDANCE WITH EC DIRECTIVE 2002/96/EC.

At the end of its working life, the product must not be disposed of as
urban waste. It must be taken to a special local authority differentiated
waste collection centre or to a dealer providing this service.
Disposing of a household appliance separately avoids possible negative
consequences for the environment and health deriving from inappropriate
disposal and enables the constituent materials to be recovered to obtain
significant savings in energy and resources. As a reminder of the need
to dispose of household appliances separately, the product is marked
with a crossed-out wheeled dustbin.

  

Summary of Contents for PR1-SO

























Reviews: