8
3. Not more than 1.5 metres (4.5 ft.) Length of tube should be used to connect the hobtop. The
tube must not be extended from one room to another and must not be passed through doors,
windows, walls, partition, ceilings or floors.
4. After the tube is fixed, check for leakage near the gas connector area. This can be done by
applying soap water solution near the gas connector area and the gas supply is opened. If the
leakage is there, you will observe soap bubbles at the point of leakage.
5. In case, you have any difficulty in assembling the hobtop, please call the nearest Prestige Service
Centre. (refer last page for your nearest Prestige Service Centre.)
Loading the battery cell to the hobtop (applicable for models : PHTS - 02 AI, PHTS - 03L AI & PHTS - 04 AI)
The Prestige Hobtop is fitted with battery operated multi spark auto ignition.
You will find the battery compartment under the bottom cover.
Open the battery compartment, place one single battery provided in such a
way that the + in the battery should match the + in the battery compartment.
Close the battery compartment.
Press the knob once to make sure that the spark is seen from the spark plug.
Now your Prestige Hobtop is ready to use.
