14
FIGURE 5: Front Crossover Panel
15
Technical Specifications
50 to 225 Watts per channel
135 Watts RMS
400 Watts peak
114 dB (135 Watts RMS /1m)
119 dB (400 Watts peak /1m)
93dB (2.83 Volts @ 1m)
8 Ohm
29Hz - 22kHz, -6dB
90 degree conical
Less than 1.20% at 135 Watts RMS (50Hz - 20kHz)
Dual Concentric“
250mm (10 ) utilising paper pulp cone with
twin roll impregnated fabric surround
52mm (2 ) round wire voice coil
51mm (2 ) round wire voice coil
Bi-wired, hard-wired passive, low loss. Time compensated.
2nd order compensated LF. 2nd order compensated HF
1.1kHz
+/- 3dB over 1.1kHz to 22kHz shelving
+2dB to -6dB per octave over 5kHz to 22kHz slope
Distributed port
105 litres (3.7 cu. ft.)
1100mm (43
1
/
2
) x 406mm (16 ) x 338mm (13
1
/
2
) (H x W x D)
37 kilograms (81.6
lbs)
High density 18mm (
3
/
4
) Birch Ply baffle and rear panel
Top and sides 18mm (
3
/
4
) particle board.
Internally crossbraced and heavily damped.
1300mm (51 ) x 550mm (21
1
/
2
) x 447mm (17
1
/
2
) (H x W x D)
43.5 kilograms (95.9
lbs)
RECOMMENDED AMPLIFIER POWER
POWER RATING
MAXIMUM SPL
SENSITIVITY
NOMINAL IMPEDANCE
FREQUENCY RESPONSE
DISPERSION
TOTAL HARMONIC DISTORTION
DRIVE UNIT
DRIVER TYPE
LOW FREQUENCY
HIGH FREQUENCY
CROSSOVER
CROSSOVER TYPE
CROSSOVER FREQUENCY
ADJUSTMENTS
CABINET
ENCLOSURE TYPE
VOLUME
DIMENSIONS
WEIGHT
CONSTRUCTION
PACKAGE DETAIL
DIMENSIONS
WEIGHT
PERFORMANCE
K
ensington
K
ensington
