OPERATION
OPERATION
Temperature can be set in 15˚F increments from 335˚F (the default temperature) up to
380˚F.
Turn the hair tool off by pressing the power button.
For safety, turn the ON/OFF switch off and unplug after use.
If you find the unit does not turn on, unplug it and plug it back in.
BASIC DIRECTIONS
1. Plug in the Prestige Ionic Styler.
2. See “ON/OFF SWITCH AND HEAT SETTINGS” section below.
Note:
It will take approximately 1 minute for the unit to be ready to use after turned on.
3. Use on dry hair only.
4. Brush the hair through entirely with the Prestige Ionic Styler to provide smoother
passes, avoid tangles, and to achieve a smoother, shinier and softer style.
5. Divide hair into sections and brush through again, slowly. Roll the brush through
each section to create maximum fullness, body and volume. Do not let the hair
twist around the brush, instead continuously roll the brush through the hair.
6. Since the heat is inside of the brush barrel, use your free hand to cup the hair and
hold it as close to the barrel as possible.
Make sure to only touch the cool touch
bristles. Do not touch the barrel.
7. While getting used to the new technology, start with small sections till you become
more comfortable. Smaller sections will result in a tighter curl, while larger sections
will result in a looser curl. Smaller sections will also help to avoid tangles.
ON/OFF SWITCH AND HEAT SETTINGS
Turn the hair tool on by pressing and holding the power button for 1 to 2 seconds. Select
the temperature setting for your preference by pressing the + (increase) or - (decrease)
buttons.
• 380˚F
- Best for normal to thick hair; or hair that is naturally very wavy or curly.
• 335˚F
- Best for thin or damaged hair; or hair that is highly treated or colored.
5
6
OFF
335˚F
default
350˚F
365˚F
380˚F
