4
APS596Z Owners REV.B
Programmed Transmitter Notification
As a security precaution each time the vehicle’s ignition is turn on the status
LED light with flash the number of transmitters programmed into the system.
This helps to identify unauthorized transmitters from accessing your vehicle.
If you believe an unauthorized transmitter has been programmed to your
system, contact your installing dealer for assistance.
Valet Mode
When valet mode is activated the status LED will light solid, and all security
and remote start functions will be disabled. To enter or exit valet mode simply
follow the steps outlined below:
1.
Turn the vehicle’s ignition ON.
2. Push and hold the valet button.
3. The LED will turn on solid when valet mode is active.
4. Release the valet button.
User Selectable Notification Chirps
System ARM/DISARM chirps can be toggled ON or OFF without entering the
programming feature banks.
1.
Turn the ignition ON then OFF.
2. Press and release the valet button three (3) times.
The system will respond with one (1) chirp for ON or two (2) chirps for OFF.
User Selectable LED
This feature will control whether the LED is ON or OFF when the system
is Armed/Locked and can be toggled ON or OFF without entering the
programming feature banks.
1.
Turn the ignition ON, OFF, ON, OFF.
2.
`Press and hold the valet button for five (5) seconds.
The system LED will respond with one (1) flash for ON or two (2) flashes for
OFF.
Bypassing The Shock Sensor
The included security shock sensor has two stages of detection, Warn-Away
and Full Trigger. To arm the system and shock sensor press the button. The
system will chirp and the lights will flash one (1) time.
To Arm the system and bypass the Warn-Away detection stage press the
button two (2) times within five (5) seconds.
To Arm the Alarm the bypass both detection stages press the button three
(3) times within five (5) seconds.
City Mode
City Mode allows the user to change the sound of the alarm system to make
it easily identified when the alarm is trigger. To enter City Mode press the
button four (4) times within ten (10) seconds.
