128-9363
15 of 24
Page 15
If the alarm system has been triggered, the icon displayed on the transmitter
LCD will indicate which zone has been activated, as well sound the beep tones,
or vibrate dependent upon the setting as shown above. The following trigger
patterns will be displayed.
Triggered and the entry attempt was made to one of the
vehicle Doors.
Triggered and entry attempt was made to the vehicles Hood
or Trunk.
Triggered and entry attempt was made to the vehicles glass,
or the vehicle has been hit or bumped hard enough to cause a
response from the vibration detector.
ADDITIONAL ICONS THAT MAY BE DISPLAYED ARE
If the arm/disarm chirp tones have been turned off at the
vehicle, when you arm, or disarm, the display will indicate this as
shown and there will be no arm/disarm chirps at the transmitter.
This is true if the transmitter is set for vibrate mode.
When the vehicle is armed, and a door is opened, or ajar,
the transmitter will chirp 3 times, the lights will flash, and the
display will indicate a door trigger as shown on the previous
page. When the door is closed or the zone clears, the trans-
mitter will chirp 1 time, and the display will clear.
When the vehicle is armed, and the hood or trunk, is opened
or ajar, the transmitter will chirp 3 times, the lights will flash,
and the display will indicate a hood or trunk trigger as shown.
When the hood or trunk is closed, or the zone clears, the
transmitter will chirp 1 time, and the display will clear.
Summary of Contents for APS-922E
Page 22: ...128 9363 22 of 24 Page 22 NOTES ...
