128-9302
24 of 28
24
SELECT
ABLE FEA
TURES
The selectable features of this unit can be set manually as explained above, or online by using our web link.
The
Accessory VE-PROG kit will include the nec
-
essary cables to connect to your computer along with the web access information and application required to take advantage of this feature. Factory default settings are indicated by
BOLD
text below
.
NOTE:
The method of manual
override
can either be selected to operate
from the valet switch or operate by custom code. Custom Code program
ming is found
in the owners guide. Be certain to place a check mark indicating the method used in the box located on the last page of the owner's manual.
NOTE:
Manual programming Keyless Entry Models with no horn output will Flash the Parking Lights instead of chirp where chirp is indicated.
Also, No data will be indicated if a feature is not available for a particular model.
The unit will enter the feature but no selection will be available.
RF Programmable Feature Bank 1 Is For T
ransmitter Programming See T
ransmitter Programming Guide.
Programmable Features Bank 2 Is
Alarm Selectable Features:
Feature Selection
1 Chirp
2 Chirps
3 Chirps
4 Chirps
5 Chirps
6 Chirps
1st DoorL/UL
500
mS
3.5 Sec.
500mS L, Dbl. U/L
Dbl L, 500mS UL
Dbl L, Dbl UL
500mS/350mS ul
2nd
Accy Lock
Auto Lock On
Auto Lock Off
3rd
Accy
. UL
Auto UL
Dr
.
Auto UL
All
Auto UL
Off
4th Headlights
Not A
vailable
5th Passive Locks
Not A
vailable
6th Pass/Act
Arm
Not A
vailable
7th Siren/Horn
Not A
vailable
8th Horn Chirp
10mS
16mS
30mS
40mS
50mS
9th O/R Method
Not A
vailable
10th 2 Step U/L
On
Off
1
1th Chp Del
Tx
On
Off
12th
Trigger Circuits
Not A
vailable
13th L/UL
Poll
Not A
vailable
14th
Aux Ch 5 Sel
Pulse
Push & Hold
10 Sec
20 Sec
Latch On/Of
f
Hold 3/S For O/P
15th
Aux Ch 6 Sel
Pulse
Push & Hold
10 Sec
20 Sec
Latch On/Of
f
Hold 3/S For O/P
16th
Aux Ch 7 Sel
Pulse
Push & Hold
10 Sec
20 Sec
Latch On/Of
f
Hold 3/S For O/P
17th
Trigger Delay
Not A
vailable
18th Data Port Select
DBI Protocol
ADS Protocol
If Programming via PC while connected to + 12 VDC you must manually enter the programming mode as shown below
.:
Turn the ignition on Press and release valet switch 3 times
Turn ignition off then on, off then on, off then on, off then on to enter web/on-line feature selection Bank 5.
Siren chirps 5 times indicating access to feature program mode. Launch the application on your PC. Connect the module via the USB to DBI
harness and follow program prompts.
Summary of Contents for APS-687E
Page 27: ...128 9302 27 of 28 27 NOTES...
