background image

128-9311

4 of 4

 PROGRAMMED TRANSMITTER NOTIFICATION (PTN) 

Every time after Disarm, when the ignition key is turned on, the unit's LED will report the 

number of transmitters programmed into the system. This safety feature will alert you if an 

unauthorized transmitter has been programmed into your vehicle's security system without your 

knowledge. Typically from the factory, there will be 2 flashes and a pause, repeated 3 times, 

indicating that two transmitters are programmed into the system. If you note additional flashes, 

an additional transmitter may have been added without your knowledge or authorization. If 

you notice a change in the transmitter LED report pattern, you can correct this by looking up 

how to erase and reprogram your transmitters found in the transmitter programming guide. 

This reprogram operation will erase all unauthorized or unwanted transmitters.

 Transmitter Battery Replacement:

1.  Locate and remove the "00" point philips head screw on the back of the transmitter 

case.

2. Carefully separate the front case from the rear.

3. Slide the CR2032 battery out from under the battery clip and dispose of properly.

4. Install the new battery with the (+) side facing up away from the circuit board.

5. Close the case and reassemble in reverse of disassembly.

FUNCTION SETTING CHART

To be completed by installer

Run Time 

_____Min 

 

Door Lock Timer 

______Sec 

 

Lights  

Pulse 

 Steady 

© 2014 Voxx Electronics Corp., 150 Marcus Blvd., Hauppauge, NY 11788 

128-9311

FCC COMPLIANCE

This device complies with Part 15 of the FCC rules and with RSS-210 of Industry Canada.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including any interference that may cause undesired operation.

Warning!

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority 

to operate the equipment.

NOTE:  The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this 

equipment. Such modifications could void the user’s authority to operate the equipment

To purchase replacement transmitters or to get additional product 

information go to: www.prestigecarsecurity.com

Reviews: