128-9345
Page 4 of 8
Page 4
a) Automatically lock the doors during step 3 on the previous page, or
b) Lock the doors only when the transmitter is operated
4. If you wish to arm the system immediately, simply press and release the
ARMING button on the keychain transmitter. The siren will "chirp" once,
the vehicle's parking lamps will flash once, the doors will lock (optional),
and the dash mounted LED will begin to slowly flash.
PROTECTION WHILE THE SYSTEM IS ARMED:
1. Opening any door, hood or trunk will cause the alarm to immediately
sound. The siren will continue to sound for 30 seconds, then stop and
automatically re-arm the vehicle. If the potential thief left a door opened,
the siren will sound for six 30 second cycles, then re-arm and ignore
the opened door.
2. Any strong impact to the vehicle’s glass will cause the alarm to trigger
for the full 30 second alarm cycle,
3. Whenever the system is armed, the dash mounted LED indicator will
slowly flash. This serves as a visual deterrent to the potential thief. The
LED is a very low current bulb and will not cause the vehicle's battery to
drain, even when left unattended for extended periods.
4. Whenever the system is triggered, the vehicle's parking lights will flash for
the 30 second alarm cycle, attracting added visual attention to the vehicle.
5. Whenever the system is armed, the vehicle's starter will be bypassed. If
a thief should choose to ignore the siren, the vehicle can not be started.
DISARMING THE SYSTEM:
1. As you approach the vehicle, press and release the Unlock button on
the keychain transmitter.
2. The siren will "chirp" 2 times and the vehicle's parking lamps will flash
two times.
3a. ACTIVE: The dash mounted LED will turn off, and remain off until the
system is re-armed.
3b. PASSIVE: Never attempt to disarm the system from a distance that
prevents you from opening a door within 30 seconds. Since the system
is programmed for passive arming, it will begin to re-arm until a door
is opened. Opening the door will suspend the passive arming cycle.
