All in one HD Video Conference Terminal
User Guide
12
and "control" menu will pop up automatically. When you move the cursor to the call button, the
call protocol and call rate boxes pop up automatically.
5
Basic Settings
5.1 Network Setting
Step 1 enter the GUI main interface and select "set > network > network Settings".
Step 2 configures the Ethernet device parameters, as shown in the following table.
Step 3 select save to save the configuration information.
Step 4 concludes.
Parameters
of the item
parameter specification
Working mode
Configure the network work mode. The options are:
⚫
automatically
⚫
10 m full-duplex
⚫
10 m half duplex
⚫
100 MB full duplex
⚫
100 m half duplex
Connection type
⚫
automatically obtain IP: terminal through the DHCP server to
obtain IP address automatically.
⚫
static IP: terminal IP address assigned by the network
administrator, you need to set up the "IP address", "subnet
mask", "default gateway and DNS address.
The IP address
Configure the IP address of this terminal.
