11
3
Connecting to a Computer
3.4
Using the Studio-series interfaces with Popular Audio Applications
Studio Series 1810 and 1824
Owner’s Manual
Avid ProTools 10+
1. Launch
ProTools.
2. Go to
Setup | Hardware
and select Studio (1824 or 1810) from the
Peripherals
list.
Click OK
.
3. Go to
Setup | Playback Engine
and select
Studio
(
1824
or
1810
) from the menu
at the top of the window. Click
OK
.
Cakewalk Sonar
1. Launch
Sonar
.
2. Go to
Options | Audio
... and click on the
Advanced
tab.
3. Change the Driver Mode to “
ASIO
.”
(
Note:
Using WDM, rather than ASIO, for pro-
audio applications is not recommended.)
4. Click the “
OK
” button.
5. Restart
Sonar
.
6. Go to
Options | Audio
... and click on the
Drivers
tab.
7. Highlight all input and output drivers beginning with “
PreSonus Studio 1824
or
Studio 1810
.”
8. Go to
Options | Audio...
and click on the
General
tab.
9. Set the
Playback Timing Master
to “
PreSonus Studio
(
1824
or
1810
)...
DAW Out
1
.”
10. Set the
Recording Timing Master
to “
PreSonus Studio
(
1824
or
1810
)...
Mic/Inst 1
.”
Steinberg Cubase
1. Launch
Cubase
.
2. Go to
Devices | Device Setup
.
3. Select “
VST Audio System
” from the
Devices
column in the
Device Setup
.
4. Select
PreSonus Studio
(
1824
or
1810
) from the
ASIO Driver
dropdown list.
5. Click “
Switch
” to begin using the Studio-series driver.
6. Once you have successfully changed the driver, go to
Devices | VST Connections
to enable your input and output buses.
