PRESONUS
19
Input
The input jack accepts balanced/unbalanced tip-sleeve or
tip-ring-sleeve connectors or XLR connectors. The input
can handle up to +24dBu unbalanced levels.
Output
The output jack accepts (balanced/unbalanced) tip-sleeve,
tip-ring-sleeve or XLR connectors. The output will deliver
up to +24dBu in signal level unbalanced.
3 . 2 A P P L I C A T I O N G U I D E
The EQ3B can be hooked to another processor, such as the
COMP16 or TubePre in a live or studio environment. We do
recommend that whenever possible, balanced cables be used.
Examples of balanced cables would be XLR or TRS (Tip – Ring –
Sleeve). A balanced cable is preferred because it generally has a
greater level of noise rejection. In other words it is less susceptible
to outside interference.
Use with a Console/Mixer Insert
The EQ3B can be connected to an insert point on a console
(mixer) by using a TRS Y-cable. This cable is Y-shaped, has a
single TRS ¼” jack on one end and two ¼” TS (Tips-Sleeve) jacks
on the other end. The single end will look like a stereo ¼”
Summary of Contents for COMP16
Page 2: ......
