6
3
Network Setup
3.5
AVB Network Setup
AVB-D 16
Owner’s Manual
2. Select Audio Routing from the touch screen.
3. Select Remote I/O Setup from the touch screen.
4. On the Remote I/O Setup screen you will see the AVB-D 16 in the list of devices
on the left hand side of the screen. If you have any NSB-series stage boxes,
EarMix 16M or other StudioLive Series III mixers connected to the same AVB
network, you will also see them in the list. Select the AVB-D 16. Once the AVB-D
16 is selected, you’ll see the setting options on the right hand side of the
touch screen.
If you have more than one AVB-D 16 on the network, touch the Identify icon to
flash the LEDs on the front panel to ensure you’ve selected the correct unit you’d
like to set up.
5. Touch the name to give the AVB-D 16 a unique name. This will be the name of
the unit on the AVB side of the network.
NOTE:
This name will not show on the
Dante network.
6. Select the drop down menu for Outputs 1-8 to choose an AVB stream to send to
the AVB-D 16. Note that you must have a stream connected here to ensure the
AVB-D 16 is receiving a proper media clock. Repeat for channels 9-16.
FX
C
FX
D
FX
A
FX
B
EFFECTS MASTER
MASTER CONTROL
1
Ch. 1
TB
System
Audio Routing
Soft Power
User Profiles
Digital Patching Options
Utils
Capture
Talkback Edit
Voume 0.5 dB
FX
C
FX
D
FX
A
FX
B
EFFECTS MASTER
MASTER CONTROL
AVB Input Streams
Audio Routing
Remote I/O Setup
Digital Patching
Earmix Setup
Remote I/O Setup
FX
C
FX
D
FX
A
FX
B
EFFECTS MASTER
MASTER CONTROL
Remote I/O Setup
Name: My AVB Bridge
AVB Inputs
Outputs 1-8:
AVB Send 1-8
AVB Send 9-16
Outputs 9-16:
Apply
i
AVB- D 16
FX
C
FX
D
FX
A
FX
B
EFFECTS MASTER
MASTER CONTROL
Remote I/O Setup
Name: My AVB Bridge
AVB Inputs
Outputs 1-8:
AVB Send 1-8
AVB Send 9-16
Outputs 9-16:
Apply
AVB- D 16
None
AVB Send 1-8
AVB Send 9-16
AVB Send 1-8
